[brianc]

Hi Mike
There are two cap blocks in the radio section as shown in the attached drawing. They are, if my memory serves me correctly, mounted back to back on 2 brass pillars slightly longer than the height of the cans. The size of the cans can be ascertained by the fixing holes in the chassis and the fact that the 2 together are lower than the chassis depth. The other sketch shows the 2 blocks on the PSU and these, too, can be sized using the fixing holes. I had to make several cans for my early TVs and it can be great fun. I usually leave the base open for future restorers and mount the caps on veroboard. Good luck.