UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post - Geometry Issues with a Dual DRF 2810 CRT TV

TapeTwoK · 17th May 2020, 3:28 pm

Hi all, I picked up this TV today, and noticed it's rather warped at the edges of the picture. I looked around the web to see if I could access any kind of service menu, but no luck. Does anyone know how to get into the service menu of this TV? (Or if it even has one?) Or are my geometry issues likely caused by components instead?

I've never come across this brand before, so I'm not familiar with it, though it does look like a rebranded Philips.

I've also posted a picture of the remote, in case that helps.

Thank you in advance!

17th May 2020, 3:28 pm	#1
TapeTwoK Triode Join Date: Dec 2018 Location: Southampton, UK. Posts: 15	Geometry Issues with a Dual DRF 2810 CRT TV Hi all, I picked up this TV today, and noticed it's rather warped at the edges of the picture. I looked around the web to see if I could access any kind of service menu, but no luck. Does anyone know how to get into the service menu of this TV? (Or if it even has one?) Or are my geometry issues likely caused by components instead? I've never come across this brand before, so I'm not familiar with it, though it does look like a rebranded Philips. I've also posted a picture of the remote, in case that helps. Thank you in advance! Attached Thumbnails