UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

QUADGOD · 19th Oct 2017, 7:21 pm

I've not considered that because it's pre set in factory and should be the correct height if arm is adjusted correctly and therefore does not need adjustment apparently...

19th Oct 2017, 7:21 pm	#3
QUADGOD Tetrode Join Date: Aug 2016 Location: Bedford, Beds. UK. Posts: 59	Re: SME series III height adjusting... I've not considered that because it's pre set in factory and should be the correct height if arm is adjusted correctly and therefore does not need adjustment apparently...