View Single Post
Old 19th Sep 2019, 10:33 am   #2
Ted Kendall
Join Date: Jul 2008
Location: Kington, Herefordshire, UK.
Posts: 2,066
Default Re: Teac X2000R, non-worker what to check?

At 1000, frankly I'd walk away.

If you insist, you could do worse than check the optos for the tension arms. The originals are made of the purest unobtainium and modern near-equivalents have apertures which are too narrow for the system to work properly, causing violent oscillations of the tension arms. This can be fixed by widening the aperture on the sensor side moulding.

Last edited by Ted Kendall; 19th Sep 2019 at 11:02 am.
Ted Kendall is online now