UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

FRANK.C · 20th Nov 2019, 7:05 pm

Hi Eddie
That is how I wired mine.
Like Andy is going to do I fitted a ferrite bead to every valve holder pin as close to the valve holder as possible.

Frank

20th Nov 2019, 7:05 pm	#1544
FRANK.C Heptode Join Date: Feb 2006 Location: Roscommon, Ireland Posts: 732	Re: The "Sussex" Homebrew Valve Tester. Hi Eddie That is how I wired mine. Like Andy is going to do I fitted a ferrite bead to every valve holder pin as close to the valve holder as possible. Frank __________________ www.electronics.frankcuffe.ovh