UG7/10 settles at 5.3V after a few seconds.
Re UG7 9 and 11 - see attached. I get a signal on UG7/9 (green) but nothing on UG9/11 (yellow).
Colin.
Quote:
Originally Posted by SiriusHardware
Can you check with a meter or scope to confirm that UG7 pin 10 is held high (4-5V).
If it is can you scope UG7 pins 8 and 11 both at the same time, one above the other on your scope. Just trying to follow the system RAM read signal backwards for a while.
Edit, sorry, typo: UG7 Pins 9 and 11 both at the same time. Hope I caught you in time.
|