[Philips210]

Hi.

I've just taken a few pics of the back cover and chassis mains plug. My set is not in the best of condition and the cover shows signs of water damage plus it's heavily nicotine tar stained unfortunately. The cover is also a little warped but hopefully the pics will give you the scheme of things. When you're ready to make your cover I'll provide some dimensions. Something that could be done I suppose is to take it to the college print facility and get them to scan it on their A3 scanner. Else I could scan it in sections on my A4 scanner with reference markers so the combined images can be stitched together.

Note also there's a reinforcing angled plate at the top of the inside of the cover and there's a foil screening plate with a wire riveted to this.
The mains input socket, which is fixed to the cover, appears to be identical to the type fitted to the continental Philips V6U. The pics to appear over three posts. Hope this helps.

Regards,
Symon.