View Single Post
Old 30th Oct 2021, 10:39 pm   #35
AdrianH
Octode
 
AdrianH's Avatar
 
Join Date: Mar 2020
Location: Blackburn with Darwen, Lancashire, UK.
Posts: 1,044
Default Re: 5FP7 project starting with the focusing coil.

I have added a second stage EF91 as a reversal of the original sawtooth, basically using the circuit that would normally drive an electrostatic CRO symmetrically. But with a change of cap values I have reduced the output of the waveform to approx a 50 Volt peak, it may also provide a little bit less loading on the first stage.#

Next step is to add the EL84 driver for the transformer and keep my fingers crossed it will work.

Click image for larger version

Name:	miller6.jpg
Views:	29
Size:	95.5 KB
ID:	244641Click image for larger version

Name:	miller4.jpg
Views:	28
Size:	54.3 KB
ID:	244642Click image for larger version

Name:	miller5.jpg
Views:	29
Size:	86.7 KB
ID:	244643

Adrian
__________________
Asking questions and learning, or trying to!
Youtube EF91Valve
AdrianH is offline   Reply With Quote