Re: Questions about my Becker Europa II car radio
Then this would be the new schematic with the switch.
Final question about one of these pins.
Pin 7 is an on/ off switch probably from within the radio itself (to shut down the external device like a cassette player). Am I right?
Pin 2 is not so important because I'm using pin 6 for the ground and have no chassis for usage.
The other pins are shown on the diagram and would be connected to the DIN-plug as you can see on the schematic I've made.
Sorry for the bad schematic, I'm still looking for a free Electrical & electronic drawing program for Mac, but no luck so far :p
Thank you!
|