UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post - Stella ST113U- distorted sound causes ?

snowman_al · 19th Jan 2019, 8:38 am

As MildMartin says the green cap is going to be a low voltage one.
You have to use a 400 volt or 630 volt cap for C24. Also an axial type will fit better.
Look for 0.01uF 400v (or 630v) film cap. (0.01uF, 10nF and 10,000pF are all the same value...)
This is an example you can get them from lots of sources https://uk.farnell.com/vishay/mkt181...pet/dp/1166851

Is that the resistor from the set?
Alan

19th Jan 2019, 8:38 am	#14
snowman_al Octode Join Date: Dec 2018 Location: Llandeilo, West Wales, UK. Posts: 1,092	Re: Stella ST113U- distorted sound causes ? As MildMartin says the green cap is going to be a low voltage one. You have to use a 400 volt or 630 volt cap for C24. Also an axial type will fit better. Look for 0.01uF 400v (or 630v) film cap. (0.01uF, 10nF and 10,000pF are all the same value...) This is an example you can get them from lots of sources https://uk.farnell.com/vishay/mkt181...pet/dp/1166851 Is that the resistor from the set? Alan