Quote:
Originally Posted by ThePillenwerfer
Unless you've altered the wiring in the handset the WHITE wire should be on T6.
Going on the photos I'd agree with Russell that the connexions should be:—
T4 - Red Wire - Bottom Left Handset Terminal (The one with the spike)
T5 - Green Wire - The Two Linked Right Handset Terminals (M1 and R2)
T6 - White Wire - Top Left Handset Terminal (R1)
The only other straw I can clutch at is suggesting you test for resistance between M1 and the hole at the extreme right where the curved fork thing goes that touches the back of the original transmitter.
|
The handset wiring has remained the same, does not work with this wiring configuration. There is no resistance between M1 and horseshoe. Thanks for the input.