View Single Post
Old 16th Jan 2021, 4:37 pm   #6
murphyv310
Dekatron
 
murphyv310's Avatar
 
Join Date: Sep 2006
Location: Kilmarnock, Ayrshire, UK.
Posts: 5,422
Default Re: Sony SL-C7 Rebuild: Alive for 20 Seconds Then ‘POP” & Smoke

Hi.
As a former engineer with (SES) Sony UK group of service depots I totally agree with Glyn. Basically on no account use non genuine transistors in the power supply. Non genuine transistors will last half an hour at the most. Replacing the electrolytic caps that have been mentioned with top quality 105c or 135c types (Panasonic or Vishay) will give a long lasting repair. Ensure all resistors in the primary circuit are not showing any signs of distress and not off value.
IMHO Some Sony power supplies are very fussy and can be a pain, the KV27PSI comes to mind as well.
__________________
Cheers,
Trevor.
MM0KJJ. RSGB, GQRP, WACRAL, K&LARC. Member
murphyv310 is offline