Re: Ekco model T526 dual standard tv
Dazzle your right 23” my measuring is rubbish it’s the A59-23w
I’ve only had a quick look at it So far but It’s had some repairs before as the solenoid for the standard switch has been disconnected and there is the usual polo mint on the dropper I’ve had a check with my meter the caps are all leaky so I’m going to replace those before I try and power it up.
only thing I have noticed is there seems to have been a Nic in the insulation of the lopt lead just before the anode cap which was then arcing on the negative of the smoothing Cap it’s been bad enough to melt the rubber cap and most likely the reason the tv was relegated to the barn all those years ago but I’ve trimmed the lead back a bit and re-soldered so hopefully it’s not caused to much damage.
|