UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

dominicbeesley · 21st Oct 2009, 1:48 pm

Hi,

Any sizes really, for next part of project I'll be needing at least one 40-way and a few 14's (I've still got a few 16's left). Also could do with a couple more 28's to finish off my RAM board to its full 56k!

At present I've been cutting up the remaining sockets to make bigger ones, i.e. 3x16 cut in the middle etc to make a 40, or more laboriously using a normal socket and soldering lots of wirewrap posts. Trouble is the wirewrap posts I have are a bit short.

Next up I'll be having a go at the z80->ISA bus thing, that (hopefully) shouldn't require too much glue logic...

Cheers

Dom

21st Oct 2009, 1:48 pm	#3
dominicbeesley Octode Join Date: Nov 2004 Location: Hebden Bridge, West Yorkshire, UK. Posts: 1,885	Re: Z80, cp/m and thanks Hi, Any sizes really, for next part of project I'll be needing at least one 40-way and a few 14's (I've still got a few 16's left). Also could do with a couple more 28's to finish off my RAM board to its full 56k! At present I've been cutting up the remaining sockets to make bigger ones, i.e. 3x16 cut in the middle etc to make a 40, or more laboriously using a normal socket and soldering lots of wirewrap posts. Trouble is the wirewrap posts I have are a bit short. Next up I'll be having a go at the z80->ISA bus thing, that (hopefully) shouldn't require too much glue logic... Cheers Dom