View Single Post
Old 30th Mar 2019, 2:00 pm   #170
FRANK.C
Heptode
 
FRANK.C's Avatar
 
Join Date: Feb 2006
Location: Roscommon, Ireland
Posts: 732
Default Re: Hedghog standards converter

Semir, well done! A great recovery.
It's hard to understand what's going on when the two most expensive parts on the boards, the FPGA and memory are OK(they cost approximately 20 and 18 euro from RS).
But the boards are faulty solely due to poor soldering. From your description it sounds almost like molten solder had just been thrown at the board.

Frank
__________________
FRANK.C is offline