UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

Diabolical Artificer · 22nd Oct 2020, 5:58 am

Hi Luca, welcome to the forum. As with any bit of gear start with a thorough visual examination looking for loose wires, burnt/exploded components and bulging electrolytic capacitors,then its a matter of checking the power supply and other voltages.

When I need help with a problem, I ask my question and attach screenshots of relevant sections of a device, like the power supply and in your case a block diagram and sweep OP section. So,find the right page/schematic, screenshot, so you have a good quality image. Some decent pics of the device would help too.

Andy.

22nd Oct 2020, 5:58 am	#2
Diabolical Artificer Dekatron Join Date: Jul 2009 Location: Sleaford, Lincs. UK. Posts: 7,658	Re: Nordmende WM3335 Sweep Generator. Hi Luca, welcome to the forum. As with any bit of gear start with a thorough visual examination looking for loose wires, burnt/exploded components and bulging electrolytic capacitors,then its a matter of checking the power supply and other voltages. When I need help with a problem, I ask my question and attach screenshots of relevant sections of a device, like the power supply and in your case a block diagram and sweep OP section. So,find the right page/schematic, screenshot, so you have a good quality image. Some decent pics of the device would help too. Andy. __________________ Curiosity hasn't killed this cat...so far.