Dial Glass Reconstruction
Here are the before and after scans of the GEC SW4 dial glass I decided to try and recontruct in Adobe Photoshop. There was just enough detail on the old glass to enable the recontruction but all the text had to be renewed from scratch as did the graduations. Started in March and just finished after many, many hours clicking away. Perhaps I should have asked if anyone had a scan first...... The final product was reverse printed onto waterslide transfer (first time I've used it - great fun!) and two prints laid one over the other and acyrilic varnished, two coats. I used a new piece of glass so I could put the remains of the original in the cabinet. The varnish on the set was in a terrible state so I stripped it and repolished with brushing wax. This gives a not-too-glossy finish and is dead easy to use. Pic of glass in set and powered up attached.
|