UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post - Bush DAC90A valve holders

Helder Crespo · 2nd Nov 2019, 5:16 pm

Dear members of the forum
I know that some valve holders on the DAC90A have a holding spring that must forcibly be removed prior to thinking about removing the valves. In my example below there doesn't seem to be any spring, either because the sockets are springless, or a previous owner removed them already.
I believe I can remove the valves safely, but would like to know your opinion prior to forcing or breaking anything.
Helder

2nd Nov 2019, 5:16 pm	#1
Helder Crespo Hexode Join Date: Sep 2019 Location: Crystal Palace, Bromley, London, UK. Posts: 417	Bush DAC90A valve holders - a basic question Dear members of the forum I know that some valve holders on the DAC90A have a holding spring that must forcibly be removed prior to thinking about removing the valves. In my example below there doesn't seem to be any spring, either because the sockets are springless, or a previous owner removed them already. I believe I can remove the valves safely, but would like to know your opinion prior to forcing or breaking anything. Helder Attached Thumbnails