View Single Post
Old 16th Sep 2020, 11:14 pm   #15
Philips210
Nonode
 
Join Date: May 2007
Location: Redruth, Cornwall, UK.
Posts: 2,562
Default Re: VHS Machine Brands - Tops and Flops

I certainly remember having many problems with Amstrad machines. The worst issue was tape edge damage due to a faulty clutch assembly. As with most awkward mechanical faults in VCRs, I found it a false economy fitting pattern deck parts. Some pinch rollers were quite warped which didn't help.

At one stage, I had quite a lot of trouble with Sharp decks where a pattern reel idler was fitted. It was difficult to establish the exact reason for its poor operation. The tyre seemed to be OK but believe it may have been excessive friction in the idler wheel. Also, when going from Rew to FF or vice versa the idler didn't seem to make a firm contact with the relevant reel turntable. Those idlers were therefore complete junk! Most pattern belt kits were generally OK though.
Genuine parts are cheaper in the long run for a reliable repair and for maintaining customer relations.

Regards,
Symon
Philips210 is offline