Quote:
I decided to take the transistor apart, but it proved somewhat recalcitrant. I'd definitely got it hot enough to melt the solder, only the 'lid' seemed to be on tight. Eventually I gave up
|
I have also noticed this, the very first Hacker that I restored (an RP18)also had transistors that I simply could not get apart. I even tried with a mini gas blowtorch
.
However like Kat, I thought I may as well test them before binning, and was shocked to find they actually worked.
Even after 2 years, the set still performs wonderfully.
I have another RP18 that I am restoring for a friend, so I will try this first before struggling to remove the transistors.