UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

dj_fivos_sak · 3rd Oct 2021, 3:06 am

Hi. Is the filament heater supply working? It should be measured between pins 12 and 13 in the power supply, labeled HEATER + and HEATER - in the schematic. There is an electrolytic cap (470uF 6V) across this supply line.

Fivos

3rd Oct 2021, 3:06 am	#4
dj_fivos_sak Heptode Join Date: Mar 2015 Location: Lefkada, Greece Posts: 969	Re: Panasonic nv fs 90 no clock or display Hi. Is the filament heater supply working? It should be measured between pins 12 and 13 in the power supply, labeled HEATER + and HEATER - in the schematic. There is an electrolytic cap (470uF 6V) across this supply line. Fivos