UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

HowardB · 3rd Dec 2021, 12:03 am

Thanks Radio1950 - I'll hold fire on the silicon diodes right now as I should have a new V1 6X5 to try by Saturday. Let's see if that changes anything. I also hope to get all the valves tested this weekend. I'll let you know how it goes.

Freya - VR2 was quite hard to reach so I may have misread the value at 6K. I'll double-check it tomorrow and report back.

3rd Dec 2021, 12:03 am	#32
HowardB Pentode Join Date: Dec 2017 Location: Staines-Upon-Thames, Surrey, UK. Posts: 122	Re: Taylor 65B Sig Generator: Dodgy Waveform Thanks Radio1950 - I'll hold fire on the silicon diodes right now as I should have a new V1 6X5 to try by Saturday. Let's see if that changes anything. I also hope to get all the valves tested this weekend. I'll let you know how it goes. Freya - VR2 was quite hard to reach so I may have misread the value at 6K. I'll double-check it tomorrow and report back.