View Single Post
Old 29th May 2014, 8:11 pm   #2
Station X
Moderator
 
Station X's Avatar
 
Join Date: Jan 2003
Location: Ipswich, Suffolk, IP4, UK.
Posts: 21,192
Default Re: Checking midget output transformer

The best you'll be able to do is use a meter on ohms range to check the continuity of the windings. If they show open circuit, then the transformer is toast. If they show continuity, then the transformer is probably OK, but it may have short circuited turns.
__________________
Graham. Forum Moderator

Reach for your meter before you reach for your soldering iron.
Station X is offline