UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post - Uher Report Monitor 4000 Start button won't engage

cirrus_oxide · 25th May 2021, 7:17 pm

Thanks again for pointing me in the right direction. Th two little tabs are intact, but they don't seem to travel quite far enough to fully lift the plate and catch on the other side of it. Having the rewind latching mechanism adjacent to the start is very handy because I can clearly see what is supposed to be happening. So my best guess is that something blocks the linkage from traveling that last little bit, or maybe the tabs are slightly worn and aren't able to lift the plate.

25th May 2021, 7:17 pm	#6
cirrus_oxide Diode Join Date: May 2021 Location: Oakland, California, USA. Posts: 4	Re: Uher Report Monitor 4000 Start button won't engage Thanks again for pointing me in the right direction. Th two little tabs are intact, but they don't seem to travel quite far enough to fully lift the plate and catch on the other side of it. Having the rewind latching mechanism adjacent to the start is very handy because I can clearly see what is supposed to be happening. So my best guess is that something blocks the linkage from traveling that last little bit, or maybe the tabs are slightly worn and aren't able to lift the plate.