Quote:
Originally Posted by ms660
That braid looks as though it should be connected to the ground end of the pot, the same pot tag that the 2.2meg resistor is connected to, it might also be that
the tag should be connected to the metal body of the pot, it's hard to say for sure from the photo about the latter.
Lawrence.
|
Cheers Lawrence, that was my instinct looking at it, it’s possible that I detached it while either removing the chassis from the case, or while working on the other end... I’ll have a think and a bit more of a trace of the circuit to see if it makes sense to try that out or not,
Thanks 🙏