Quote:
Originally Posted by greg_simons
One other very important point, never under any circumstances disable or increase the wattage of the ht line fuse resistor, it's meant to overheat and drop off the tag strip thereby protecting the priceless output transformers should a fault develop in the output stages, many a good twenty has been reduced to scrap by such action.
greg.
|
Greg I was thinking of replacing the HT line fuse with a 20mm 350mA Fuse and Holder. I was also thinking of changing the Bulgin power socket to a IEC one with a switch and fuse.
http://www.amplabs.co.uk/Leak%20stereo%2020.htm
I like what amplabs do with the ST20