Re: Lafayette HA-350
Hi g0hze snowy, thanks for your reply. I have emailed Ed Dinning but if you have something suitable then happy days. The spec is as follows:
6.3v 3A
6.3v 2A
140-0-140v 110mA
The rectifier uses a pair of diodes returning to HT winding centre-tap, but I see no reason why I couldn’t use a transformer with a single 140v or 150v 110mA winding and a bridge rectifier instead.
The existing transformer is a drop-through measuring 75mm x 85mm x 60mm height above chassis. I could accommodate a slightly larger footprint but not by much.
Cheers,
Jerry
|