UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post - Bush VHF61, my first restoration attempt.

stitch1 · 22nd Jan 2012, 9:49 am

If you do change all the 'potentially bad' caps then please do them one at a time and check the radio afer each change. And only do this after completing safety checks and changing 'that cap'.

Better still download the trader sheet and follow a guide like Paul's http://www.vintage-radio.com/repair-...ion/index.html

Also check out the book in the sticky above.

By changing the caps one at a time and following the Trader sheet you will learn what they do and hopefully see performance improve as you go. It will also make fault finding easier if you come accross a problem.

22nd Jan 2012, 9:49 am	#4
stitch1 Heptode Join Date: Jan 2008 Location: Durham, County Durham, UK. Posts: 826	Re: Bush VHF61, my first restoration attempt. If you do change all the 'potentially bad' caps then please do them one at a time and check the radio afer each change. And only do this after completing safety checks and changing 'that cap'. Better still download the trader sheet and follow a guide like Paul's http://www.vintage-radio.com/repair-...ion/index.html Also check out the book in the sticky above. By changing the caps one at a time and following the Trader sheet you will learn what they do and hopefully see performance improve as you go. It will also make fault finding easier if you come accross a problem.