UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

ppppenguin · 4th May 2010, 7:53 pm

I'm working from the Pye V2 data which happens to be at hand. This should be pretty similar to the V4 but I don't want to be too dogmatic. I can dig out the Trader and RTVS data if required. The FOP is an ECL80 and readily recognised because there's a transformer connected to the anode of the pentode and the secondary of said transformer is conencted to the V scan coils. Just like an audio output stage really.

4th May 2010, 7:53 pm	#206
ppppenguin Retired Dormant Member Join Date: Dec 2003 Location: North London, UK. Posts: 6,168	Re: Pye v4 I'm working from the Pye V2 data which happens to be at hand. This should be pretty similar to the V4 but I don't want to be too dogmatic. I can dig out the Trader and RTVS data if required. The FOP is an ECL80 and readily recognised because there's a transformer connected to the anode of the pentode and the secondary of said transformer is conencted to the V scan coils. Just like an audio output stage really.