Today I bought a home made disco unit from the boot fair.
It has turned out to be a poor buy, very badly put together with some soldering which looks like it was done using lighted matches.
But It has some interesting amp modules in it.
Marked ILP HY50 which is a 25 watt power amp, and a ILP HY5 which is a preamp mixer tone control module.
I have found some technical information on the HY5 on a previous
thread posted by ukcol
I can find some adverts for the power amp module HY50
But I cant find any information on the wiring of the HY50
I am assuming that the connections are fairly straight forward.
orange, supply +25v
black, supply -25v
green, supply ground, input ground, speaker ground
blue, speaker
white, input
Has anyone got the installation manual for the HY50 or can they confirm the pin connections above.
Thanks
Mike