Re: Murphy A122
Hello Fellow Enthusiast's
Here is an update on the restoration of this set, during the process of renewing some of the wiring I found the screened lead that ran from the volume control to the wafer switch had perished, oh dear, so it was a case of finding something suitable to do the job and as you see from the picture of the wafer assy it required a great deal of quiet and patients to get in there with a soldering iron! phew! But however, I did manage it and then got on with replacing the smoothing caps, I replace one with a dual 16uF and the other with a 10uF, just got to find a large rubber bung to blank the hole off. So have a look at these pictures.
Best wishes
Ken
|