Quote:
Originally Posted by orbanp1
... the voltages you list are the suggested operating voltages. The maximum voltage ratings are higher, the values depending on which datasheet you look at. See the RCA 6BM8/ECL82 datasheet at http://frank.pocnet.net/sheets/049/6/6BM8.pdf ...
|
That's a very interesting addition to the data sheets I have accessed so far. The general consensus seems to be: output power = 3.5 W with an anode dissipation of 5 W, which gives a total input power of 8.5 W. At 370 V, this power represents an anode current of 23 mA.
The suggestion of Restoration73 to wire a 5.6k resistor in the HT feed represents a voltage drop of 56V for every 10mA of anode current - a useful option. The alternative is to add some droppers to the PSU (as suggested by G3RZP elsewhere] to bring the HT down to somewhere between 300 and 350V for the whole set. Time to dig out some large WW resistors.
Many thanks to all
- Peter G3PIJ