View Single Post
Old 13th Dec 2011, 7:25 pm   #624
Andymic
Retired Dormant Member
 
Join Date: Jan 2010
Location: Harrow, London, UK.
Posts: 78
Default Re: The "Sussex" Homebrew Valve Tester.

Ok
Based on 1oz/ft board.....
The 3A taps net to be a minimum of 1.37mm
The 1A tap needs to be 0.781mm
I don't need to worry about the others are the thinest track is already 0.8mm

Andy
Andymic is offline   Reply With Quote