Quote:
Originally Posted by Diabolical Artificer
Had a few of these Telequipment scopes including a S51A, all the caps re-formed ok. Did you power it up Brett through a LL? If you power it up and leave it on with an AC ammeter clipped on to the fuse (fuse out) in the plug to monitor it's current consumption, you should be fine. If current draw goes up, switch off and check the caps.
One of those plug in "watt meter's" is handy for this sort of thing.
Andy.
|
I got impatient and powered up without a lamp . I figured if it went bang, i don’t know enough to do a repair myself, I would just wait for something to come up on paybay.
It’s still working