UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

DMcMahon · 24th Jul 2021, 10:36 am

Well done on fixing the elusive short, must be a big relief for you.

I think the big Tantalum is C707 so should be there, looks like your Drive Control board has slightly different track artwork so the diodes have been fitted on the rear. See my board photos and layout drawing.

After rechecking mine it is D13 not D12 that is lifted at one end on the motherboard. I am going to leave it lifted to see what happens when I eventually get it going.

Making new switch latching mechanisms sounds difficult.

David

24th Jul 2021, 10:36 am	#72
DMcMahon Dekatron Join Date: Apr 2019 Location: Worthing, West Sussex, UK. Posts: 6,603	Re: Uher CR 210 Cassette Recorder Check Out Well done on fixing the elusive short, must be a big relief for you. I think the big Tantalum is C707 so should be there, looks like your Drive Control board has slightly different track artwork so the diodes have been fitted on the rear. See my board photos and layout drawing. After rechecking mine it is D13 not D12 that is lifted at one end on the motherboard. I am going to leave it lifted to see what happens when I eventually get it going. Making new switch latching mechanisms sounds difficult. David Attached Thumbnails