View Single Post
Old 5th Aug 2012, 7:12 pm   #9
Michael Maurice
Moderator
 
Michael Maurice's Avatar
 
Join Date: Feb 2006
Location: Wembley, Middlesex
Posts: 7,219
Default Re: A pictorial guide to servicing the Collaro Studio autochanger

Connect the deck to the mains,

Switch the deck on, it will probably start the cycle change and stop.

Restart the deck and make sure that the arm rises to the correct height and moves across before returning and switching off. It is imperative that the arm goes high enough otherwise it will not touch the side of the record but go underneath it and scratch it.

Now restart it again but instead of letting the arm go all the way to the centre, stop it with your finger to simulate a record, the arm should return to its rest, lower a bit, then go back to drop on the record.

Provided these tests prove OK, refit the turntable and test with a record.

Check that the rubber damping ring is fitted to the turntable and that it is in good condition Click image for larger version

Name:	collaro studio 025.jpg
Views:	680
Size:	70.6 KB
ID:	69415 refit the turntable.

Refit the circlip to the centre of the turntable.
__________________
Forum Moderator

http://www.michaelmauricerepairs.co.uk/
Michael Maurice is offline