UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

FERNSEH · 9th May 2021, 2:46 pm

Baza100 wrote: "Hello, Very interesting what you are doing. What kind of wood have you used? Thanks Barry"
Hi Barry, very cheap plywood was used for the construction of the cabinet shell. The same material was used in the construction of the Ferguson 991T cabinet.
The internal assembly blocks are 15 X 15mm pine wood strips bought from B&Q. The two cabinet feet were made by clamping together off-cuts from another project.

DFWB.

9th May 2021, 2:46 pm	#7
FERNSEH Dekatron Join Date: Mar 2005 Location: Gateshead, Tyne and Wear, UK. Posts: 7,444	Re: Cabinet for Wartime Civilian receiver. Baza100 wrote: "Hello, Very interesting what you are doing. What kind of wood have you used? Thanks Barry" Hi Barry, very cheap plywood was used for the construction of the cabinet shell. The same material was used in the construction of the Ferguson 991T cabinet. The internal assembly blocks are 15 X 15mm pine wood strips bought from B&Q. The two cabinet feet were made by clamping together off-cuts from another project. DFWB. Attached Thumbnails