UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

peteratnith · 29th Apr 2012, 3:24 pm

Hi Andy,

Drill a hole for a 4 or 5 mm nut and bolt in a piece cut roughly to size then "turn" it to size with a file in a power drill. Then glue up the hole. A neat way is to cover one side of the hole with tape and put glue in the other side. I.ve used double sided tape to hold a disc to the face of a lathe chuck. You could do that on a drill, with care.
Peter

29th Apr 2012, 3:24 pm	#3
peteratnith Retired Dormant Member Join Date: Jan 2008 Location: Glasgow, UK. Posts: 119	Re: Paxolin Disks Hi Andy, Drill a hole for a 4 or 5 mm nut and bolt in a piece cut roughly to size then "turn" it to size with a file in a power drill. Then glue up the hole. A neat way is to cover one side of the hole with tape and put glue in the other side. I.ve used double sided tape to hold a disc to the face of a lathe chuck. You could do that on a drill, with care. Peter