View Single Post
Old 13th Jul 2018, 7:21 am   #9
Craig Sawyers
Dekatron
 
Craig Sawyers's Avatar
 
Join Date: Nov 2010
Location: Oxford, UK.
Posts: 4,919
Default Re: VCM163 Calibration Question

In which case, the voltage across that 10 ohm resistor via the red/brown test points will only reveal that the oscillator is oscillating. Those test points have nothing to do with the output setting resistor.

So the OP's dilemma is still unresolved.
Craig Sawyers is online now