UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

Pepelephew · 27th Dec 2011, 9:06 pm

Hello all,

Working through my first restoration project on my Bush AC34. Have run into some trouble with the sound. I have replaced most wax capacitors and all valves, except the UL41. When powered up everything seems to be OK but not a peep from the speaker. There is some crackling when I connect/disconnect the speaker wires but nothing else
Any help would be appreciated as to where to start to look for the problem.

Thanks a mill

27th Dec 2011, 9:06 pm	#1
Pepelephew Pentode Join Date: Nov 2011 Location: Prosperous, Co. Kildare, Ireland. Posts: 176	Bush AC34, no sound. Hello all, Working through my first restoration project on my Bush AC34. Have run into some trouble with the sound. I have replaced most wax capacitors and all valves, except the UL41. When powered up everything seems to be OK but not a peep from the speaker. There is some crackling when I connect/disconnect the speaker wires but nothing else Any help would be appreciated as to where to start to look for the problem. Thanks a mill