Quote:
Originally Posted by el gringo
Quote:
Originally Posted by jonnybear
May be worth checking high value resistors and capacitors in the agc line.
john
|
Thanks Johnny, just replaced the 'R17' 2M2, with 2x1M (nearest I had! ), are the lower value caps (pF) worth a look as well?
Pete |
No low value caps are normally reliable, R6 & 17 = 2.2m ohm, R1 = 680k,R16 = 100k, C23 = .1uf, you can test these with a meter to see if they are in range, you may have to remove one leg though.R7 C21 also worth a check.
John