UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post - Bush DAC90A

JUSTDAMO · 17th Oct 2019, 8:25 pm

Hello

Having acquired the above radio, it does look dusty inside, possibly not been used for a while so I have put a 3 amp fuse in and powered the radio up. The dial light came on but dimmed a little straight away, all valves appear to be lit but there is no sound from the speaker whatsoever.

So although I have little experience, I'm armed with a test meter and the willingness to learn.

Just wondering where I should start to sort this problem out?

Thanks

17th Oct 2019, 8:25 pm	#1
JUSTDAMO Triode Join Date: Jul 2019 Location: Hyde, Greater Manchester, UK. Posts: 42	Bush DAC90A - power but no sound Hello Having acquired the above radio, it does look dusty inside, possibly not been used for a while so I have put a 3 amp fuse in and powered the radio up. The dial light came on but dimmed a little straight away, all valves appear to be lit but there is no sound from the speaker whatsoever. So although I have little experience, I'm armed with a test meter and the willingness to learn. Just wondering where I should start to sort this problem out? Thanks