UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post - Kodak Carousel slide-projector - remote-control?

TonyDuell · 2nd Oct 2019, 1:19 pm

I am not sure how standardised the remote controls were across the Carousel range (my guess is that they were), but the pinout I have for the 6 pin DIN socket is :

1 : change reverse
2 : change forwards
3 : +ve supply
4 : focus motor
5 : focus motor
6 : -ve supply

The slide change buttons are wired between +ve (pin 3) and pin 1 or pin 2 as appropriate. The focus switch is essentially a centre-off DPDT thing wired as a reversing switch. Inputs from +ve and -ve (pins 3 and 6), output to the motor (pins 4 and 5).

And yes the wired remote control is just switches.

2nd Oct 2019, 1:19 pm	#4
TonyDuell Dekatron Join Date: Jun 2015 Location: Biggin Hill, London, UK. Posts: 5,208	Re: Kodak Carousel slide-projector - remote-control? I am not sure how standardised the remote controls were across the Carousel range (my guess is that they were), but the pinout I have for the 6 pin DIN socket is : 1 : change reverse 2 : change forwards 3 : +ve supply 4 : focus motor 5 : focus motor 6 : -ve supply The slide change buttons are wired between +ve (pin 3) and pin 1 or pin 2 as appropriate. The focus switch is essentially a centre-off DPDT thing wired as a reversing switch. Inputs from +ve and -ve (pins 3 and 6), output to the motor (pins 4 and 5). And yes the wired remote control is just switches.