Hi,
This post is going longer and longer.....
I don`t remember where all the issues came from.
Are you sure that your HV-probe is right? Did you tested it
with another working TV?
Your last picture is showing the faulty resistors - and the new? caps?
IT HAS TO BE CLEAR, that you have to use only the finest caps (Quality)
in HV/line output stages!
Now there are caps available which are only good for 50 Hz against distortion.
There are caps which doesn`t could deal with hight peak to peak voltages.
There is another problem with metal film resistors. Depending on the production
they are not able to work with higher voltages!
Some deflection coils covering resistors, very often in units for 70° and 90° angles.
Some companies did use awful thin wires for the wiring, I should swap them.
Regards,
German Dalek