As you can probably guess although qualified in electronics, this is my first on radio, audio and valve equipment and any assistance is greatly appreciated. Besides the missing valve, some caps look to have been replaced but other components (caps &/or resistors) have been cut out and the wires left which is why, if I could purchase one, a schematic would be very helpful.
To reply:-
1. 250V AC was the norm in Yorkshire until the switch to 240V in the late 50's and on the switch to 230V, its stayed at 240.
2. Except for cosmetic condition, the photo you've posted is identical to my radio.
3. Many thanks for info on the missing valve.
The set looks to be AC only and as yet I haven't checked any of the tappings but isn't the EBL1 a 6V filament (like the EF9 and EK2) whilst the CBL1 a 40V filament?
|