UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post - Gemini 80-Bus System

JohnBHanson · 15th Sep 2019, 4:29 pm

I have added your makefile into the distribution. In addition I have fixed another problem in the gemini SCSI driver in that the xebec controller did not de-select after the message state.

Again download the latest version to get the fix. Now the GM925 gets to the M> prompt and you can do directories of A and B (Hard disk) M (Memory Disk) and C (floppy) although I have the wrong type of floppy in the config file. I hope that helps you.

With the correct hard disk image and fingers crossed this should now work.

As you probably worked out - I have not run gemini software on my emulator - But would be greatful if you have a copy of the GM925 hard disk image you could post it on your resources website.

Thank you.

15th Sep 2019, 4:29 pm	#219
JohnBHanson Heptode Join Date: Aug 2009 Location: Worthing, Sussex, UK. Posts: 661	Re: Gemini 80-Bus System I have added your makefile into the distribution. In addition I have fixed another problem in the gemini SCSI driver in that the xebec controller did not de-select after the message state. Again download the latest version to get the fix. Now the GM925 gets to the M> prompt and you can do directories of A and B (Hard disk) M (Memory Disk) and C (floppy) although I have the wrong type of floppy in the config file. I hope that helps you. With the correct hard disk image and fingers crossed this should now work. As you probably worked out - I have not run gemini software on my emulator - But would be greatful if you have a copy of the GM925 hard disk image you could post it on your resources website. Thank you.