Re: Revox A77 refurbishment advice please.
The capacitors I source from RS or Farnell and use either Panasonic, Nichicon, Wurth or Vishay.
The trimmers are not so easy to obtain but can be sourced.
You will need an alignment tape and test equipment to set it up.
The early counters used only one belt, later counters used a second toothed belt which is on the counter itself.
I’ve not personally encountered problems with the motor run capacitors, though I’m sure others have.
You may have to replace the entry guide roller.
Nagravox are expensive as is the shipping from Australia
I know these machines very well and have service many of them over the years.
|