UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post - Please help with a schematic (Grundig TK-30)

McIntyre · 14th Feb 2005, 6:47 pm

Kak deela Digger! (hope that's spelt right - have a brother who lives in Moscow)

I have scanned the pages for the TK30 from my R2R manual and they are available here :

http://www.geocities.com/skilpadkos/tk30.jpg (page one)
http://www.geocities.com/skilpadkos/tk31.jpg (page two)

Two rather big files so you might want to save them to desktop before printing.

The TK30 is a two speed 7 1/2/ and 3 3/4 IPS two track R2R with maximum spool 7 in.

To dismantle pull off speed-change knob, undo four coin slotted screws and lift off top plate with stop/start and fast wind keys held down. Undo four 3BA nuts securing chassis to cabinet. Pull out loudspeaker plug and lift chassis from cabinet vertically.

Cheers,
Andrew (RSA)

14th Feb 2005, 6:47 pm	#5
McIntyre Retired Dormant Member Join Date: Sep 2004 Posts: 0	Re: Please help with a schematic !!!! Kak deela Digger! (hope that's spelt right - have a brother who lives in Moscow) I have scanned the pages for the TK30 from my R2R manual and they are available here : http://www.geocities.com/skilpadkos/tk30.jpg (page one) http://www.geocities.com/skilpadkos/tk31.jpg (page two) Two rather big files so you might want to save them to desktop before printing. The TK30 is a two speed 7 1/2/ and 3 3/4 IPS two track R2R with maximum spool 7 in. To dismantle pull off speed-change knob, undo four coin slotted screws and lift off top plate with stop/start and fast wind keys held down. Undo four 3BA nuts securing chassis to cabinet. Pull out loudspeaker plug and lift chassis from cabinet vertically. Cheers, Andrew (RSA)