UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

Ultrasheep · 11th Jul 2019, 7:00 pm

Thanks for the quick replies. I have joined the Yahoo group and printed off the manual. I have a multimeter. When looking at the static voltages that need to be measured would I be correct to think that the first letter given (from c, b and e) would be where I would connect the ground connection of my meter? Do I need to also measure the Ic values? If so, please could you advise how I would do so.

11th Jul 2019, 7:00 pm	#4
Ultrasheep Diode Join Date: Jul 2019 Location: Plymouth, Devonshire, UK. Posts: 9	Re: Hacker Constellation Amplifier Thanks for the quick replies. I have joined the Yahoo group and printed off the manual. I have a multimeter. When looking at the static voltages that need to be measured would I be correct to think that the first letter given (from c, b and e) would be where I would connect the ground connection of my meter? Do I need to also measure the Ic values? If so, please could you advise how I would do so.