View Single Post
Old 5th Jan 2012, 9:36 pm   #42
Pepelephew
Pentode
 
Pepelephew's Avatar
 
Join Date: Nov 2011
Location: Prosperous, Co. Kildare, Ireland.
Posts: 176
Default Re: Bush AC34, no sound.

Graham,
There is a blue wire from the first pin to the plug and socket and in turn to the transformer on the speaker. My meter is subdivided and in the ohms section it is graded 2m,200k,20k,2k and 200. I think I may be measuring using the wrong grade.I will go over this again.
I measured some of the resistors,some matched the colour codes near enough others were
Off somewhat.
I will try and get voltage measuremeents on the valves this weekend
Thanks for your patience
Pepelephew is offline